creative floor design
Unlimited design possibilities
Whether it is recolouring, sprinkling chips or adjusting gloss levels – with our coatings, any redesign of your floors is possible.
signage and markings
Attractive line and area markings for optimum safety
Signposts or pictograms are applied to the floor using stencils and foils. The permanent, transparent on-top coating provides long-lasting protection against abrasion and wear.
Safety
Restore conductivity
If ESD floors in industrial plants have lost their conductivity, the resulting overvoltage can become a hazard for sensitive machinery. With the Dr. Schutz ESD Floor System, the conductivity of worn floors can be restored and permanently assured. The result: Optimum results that fulfill all international norms (IEC 61340-5-1 and ANSI/ESD S20.20).
safety
Prevent slip accidents
For your employees‘ safety, industrial floors can be equipped with the slip resistance classes required by the employers’ liability insurance association . Dr. Schutz permanent coatings protect against slip accidents and ensure classes R 9 – 11 as required.
building area | R9 | R10 | R11 |
---|---|---|---|
entrance area | ✓ | ||
Restrooms (e.g. washrooms, toilets) | ✓ | ||
Break rooms (e.g. recreation rooms, canteens) | ✓ | ||
Laborräume | ✓ |
less downtime
We renovate your floors with hardly any downtime
Compared to replacing the floor, a renovation with the Dr. Schutz systems can be carried out within a few days or even hours. If it has to be done particularly quickly, a special UV technique is used that makes the floor usable again within a very short time.
less abrasion
Proven to be more resistant than any other on-top coating
Thanks to their high abrasion resistance, Dr. Schutz coatings are ideal for high traffic areas, including manufacturing and warehouses.
Highest resistance to abrasion according to ISO 5470-1:1999 / ASTM D4060
Abrasion resistance in comparison after 1.000 rotations
Sources: EPH Certificate 2718538 from 12.02.2019 and FIGR- and WFK/FRT Report HO 2829/04-A
less maintenance costs
Save costs in maintenance
Dr. Schutz permanent coatings create surfaces that are very easy to clean and thus reduce energy, water and chemical consumption by over 50%.
canteens
Give your canteen a new look
Bring a fresh atmosphere into your canteen and completely redesign its floors with colours, chips or other design motifs. All without tearing out the floors, dust or noise. And thanks to the hermetically sealed coating on the surface, your floors will be particularly easy to clean and hygienic.
office buildings
Optimum protection and a long service life for office floors
Floors in office buildings are subject to heavy daily wear and tear. To avoid abrasion and staining, they should be protected with a permanent coating after renovation.
restrooms
Attractive and hygienic break rooms and restrooms
Dr. Schutz permanent coatings are particularly suitable for hygiene in break rooms and restrooms: Surfaces and joints are hermetically sealed, reducing germ contamination by 99.5% and permanently preventing odours.
avoid waste
Renovate instead of tearing out
For every square metre of torn-out floors more than 3 kg of waste is produced, less than 10% of which can be recycled. By renovating with the Dr. Schutz floor remake system, you make a sustainable contribution to protecting the environment.
carbon neutrality
Reduce carbon dioxide emissions and protect the climate
Compared to replacing a floor, a renovation with the unique Dr. Schutz floor remake system saves over 98% in CO2 emissions. (Source: assessment 2020/06-12227 of the German Institute for Sustainability & Economics). To compensate the remaining 2% of CO2 emission and thus making our floor renovations completely carbon free, we support a regional reforestation project by PLANT MY TREE in Germany.